collection message map

Hello, welcome toFoshan City is a standard tool Limited!

Foshan City is a standard tool Limited--Commodity is high quality as the right way, Italy is a benchmark mark

0757 support hotline 81267033

hot key words: Product Categories
A Case Study of Six Common Faults in Automobile Maintenance
current location:Home » A Case Study of Six Common Faults in Automobile Maintenance

A Case Study of Six Common Faults in Automobile Maintenance

返回列表 source:admin View the phone URL
A Case Study of Six Common Faults in Automobile Maintenancescan it
Browse:928 Release date:2017-08-03【Big normal small

1, the car oil table are not allowed

My car bought for some time, now there is a small problem, although not affect the use, but also made me very inconvenient. The problem lies in my oil table, its accuracy is absolutely doubtful. In the first 1/2 of the time, the pointer dropped very slowly, and after half of the feeling of the engine is like drinking oil in general, the pointer brush down down. Every time I will be in the pointer to reach the last white line when the refueling, but sometimes 100 pieces of oil added to the pointer to the location is not the same. And even once filled with oil, the pointer is not to the top, how is this going on?

Diagnosis and treatment advice: the rate of decline on the oil table pointer rate is not the same phenomenon, there may be design problems, some models of the oil table itself is not designed in accordance with the linear way, the first half slow, the second half of this phenomenon Should be more normal. Oil gauge pointer is unstable, oil level sensor may be a problem. If confirmed to fill the oil after the table did not watch the top, should be the oil meter monitor problems. These problems to the repair shop repair it.

2, car power windows suddenly automatically decline

My car is in the high-end models, four windows is the standard equipment, the original use is extremely convenient, especially the main driving side of a key lift design, eliminating the need to pay through some of the time, always hold down The trouble with the control buttons is much better than the electric doors and windows of my car. But there are various problems of high-level things, and now my main side of the power side of the window when the rise to the top, will suddenly drop a section, which makes every time I shut the window, but also carefully control it, save into a Trouble, will the control system is not a problem?

Medical advice: General limousine in the design of the power window will be installed on a anti-folder function, to avoid accidental operation caused by personal injury. In the course of the use of the vehicle, if the door top box with some objects, the window rose to this part of the time, the sensor will start anti-folder function, so that the window down. In addition, sometimes in the high-speed driving process, due to voltage causes the glass can not rise smoothly along the track, will also lead to anti-gripping function of the start. In this case, it is best to look at the special maintenance station to adjust, check whether there is a foreign body to affect the window movements, and to adjust. Please add division micro letter: qxzyjs

3, car lights sealed lax

Some time ago the climate is volatile, often there is a rainstorm phenomenon, my car can be considered a few storms, finally blessed God, my car through a crisis again and again, did not become a city overpass under the water of the victims, which is part of the I have a hard drive level. Although the car did not sacrifice in the rain, but this continuous rain really brought me a lot of trouble. As long as the rain, my car's headlamps is a misty misty, you say that the water inside the shade I can not rub ah! Think of the car when the fog, you can use the way to remove the warm baking, I wonder if this baking practice is also applicable to the headlights it?

Diagnosis and treatment advice: As the lights sealed lax, in the cleaning and rain when it is easy to cause water, and when the temperature difference between the inside and outside will form a fog. This time it is best not to carry out high temperature baking, the lamp material is generally plastic, if the baking temperature is too high, it may cause the appearance of the lamp softening deformation, affecting the use and beautiful. In addition, the current lights are generally monolithic, transparent shade, but also sticky with a protective body of the back plate, high temperature baking will also cause the glue between the two glue melting, increase the car The possibility of water into the water. In general, the water inside the lights in the daytime sunshine can quickly evaporate disappear, if your lights frequently appear water phenomenon, you should check the service station to see the light body to see if it is due to the collision The lights are damaged, causing frequent water.

4, the car engine ignition difficult

My car has been bought for nearly a year, and now the problem is that each time the ignition is very difficult, need 4 to 5 times, the engine jitter is very powerful, issued a "boom" sound, which 1 year Of the time, every time I carry out maintenance on time, the oil is also used in the more advanced brands, the replacement of the filter even more wrong time, but why this will happen?

Diagnosis and treatment advice: This situation should be due to fuel injection caused by blocking, it is estimated that after cleaning the fuel tank can be returned to normal work. In addition, the heat pump near the valve will be one of the reasons. If the carbon deposition is not clean, although the oil out of the oil can go in, but there are some adsorption, will cause high fuel consumption, abnormal intake and other issues, is bound to affect the working conditions of the engine. So go to the repair station to clean these parts, is the best way to solve.

5, automatic car long driving time will have a paste of taste

As a result of living in the metropolis, traffic jam is always difficult to avoid, I think that driving technology is not first-class, so when the choice of the car when the main consideration is the automatic transmission models. At the same time, the current auto market is not very prosperous, the price drop and fall, but also I can choose the more richer models. Opened a period of automatic transmission, I found some problems, that is, when I use the L file when the time, a little longer will have a paste flavor. In the process I did not carry out rapid or rapid deceleration of the manipulation, why is there such a phenomenon? Will not be the mess of the clutch, right? Is it possible to move this car only?

Diagnosis and treatment advice: This will appear this situation, with your use or have a great relationship, according to the use of automatic transmission practices, L block is generally only in the rain, snow weather conditions, when the road adhesion is low, It will improve the engine to turn, gear driving, due to good road conditions, the speed will rise quickly, and this time because the limited speed transmission and will not shift operation, and thus the engine speed not only increased, resulting in huge heat, and These heat baked to the car's interior trim or ternary catalytic device, it will produce vague taste. Therefore, in the case of good road conditions, should avoid the use of L block cars, on the one hand is conducive to improving the speed and reduce fuel consumption, while the other people can make your car's engine, transmission from damage. ...

6, the car body has abnormal sound

I am a person who likes to smoke, always make the car get a miasma, open the window and noisy, so when the transfer of the specially selected a skylight models. However, now the sunroof in the open waiting, always issued abnormal sound, it was said that the exhaust pipe and the collision between the body of the sound. In the road conditions are more bumpy, the trunk will also produce abnormal sound, what is the reason for this?

Diagnosis and treatment advice: skylight problems should not have much relationship with the drainage pipe, because the skylight in the opening process, only the skylight in the movement, if the sound may be some parts of the lubrication is not good, you can try to smear some lubrication Grease, there may be long for the skylight in the open state, so that the rails gathered a lot of dust, after wiping the sound should disappear. The noise inside the trunk can check whether the exhaust pipe is not fixed due to the percussion. In addition, you should also check the trunk or the car inside the trunk is fixed or solid, or in the trunk with or without other heavy objects, they may also be the impact of the trunk of the culprit


Foshan City is a standard tool Limitedall rights reserved 粤ICP备17063786号-1
support hotline:0757-81267033  tel:18900862823  fax:0757-81267033
address:Nanhai District, Foshan City, Guangdong Province, Luo Village Road, Guangdong new light source industrial base A3 building on the first floor  E-Mail:
Production:企划动力

二维码